GP Recyko PRO 4-slot P462 NiMH Battery Charger
* When charging 1-4 x AA 2100mAh batteries at power input DC 9.0V ⎓ 2.2 A
GP Recyko PRO 4-slot P462 NiMH Battery Charger
Full battery in just 1 hour*
The intelligent power supply delivers a fast charge in only 1 hour* for 1 to 4 AA/AAA rechargeable batteries with a USB-C input.
* When charging 1-4 x AA 2100mAh batteries at power input DC 9.0V ⎓ 2.2 A
Smart battery recovery
Reactivate and optimize the performance of ageing and over-discharged batteries.
Flexi-charging
Charge multiple sized batteries simultaneously, including 1 to 4 AA/AAA NiMH batteries at a time, with optimized charging for each individual battery.
Battery level check
The LED indicates the power status of your batteries to help you identify drained batteries and recharge with ease.
Clear charging status and QR code
Enjoy clear visibility of the charge status of your batteries with LED lights that let you know if the charge is complete or in progress. Scan the QR code to view our video guide for this charger.
Safe auto cut-off
Don’t stress about overcharging. The auto cut-off feature detects when the batteries are fully charged and cuts power to prevent overcharging or overheating, which helps to extend battery life.
Bad battery detection
For additional safety, this AA and AAA battery charger is equipped with bad battery detection. If an alkaline or bad battery is placed in the charger, the LED lights emit a rapid flash, so you know the battery needs to be removed.
Specifications
- USB Charger
- Approx.87.9 (L) x 77.5 (W) x 25.2 (H) mm
- Approx. 62g
- 4 / 4
- Green LEDs ON for 0.5 second when USBC power up
- Charging in progress - Green LED slow flashing
- Over discharge/ Aged battery charging in progress – Yellow LED slow flashing
- Fully charged – Green LED ON
- Bad/Primary Batteries inserted – Red LED ON
- Battery Level Check (BLC)*
- Green LED ON for Battery Full
- Red LED slow flashing for Battery NOT Full
- System warning:
- ALL LED Red/Green fast flashing
* Insert battery in slot 1/2/3/4, it will start BLC mode with LED indication on corresponding channel as mentioned above and keep for 5s. Then it will go to normal charging To recheck BLC, just take out and insert battery again.
- 1.4V
- 2.2A approx. for charging 1-4 pcs AA Ni-MH Batteries
- 1A approx. for charging 1-4 pcs AAA Ni-MH Batteries
- USBC Input from DC9V 2.2A
- 2100mAh AA battery – About 60 mins
- 850mAh AAA battery – About 55 mins
- Timer protection – AA 170 Minutes/AAA 170 Minutes
- -dv
- Temperature cut-off
- Primary battery protection
- Reverse polarity protection
- 0°C to 35°C
- CE, UKCA, Rohs





